Samsung UM27A1C3 Air Conditioner User Manual


 
Setting the Time
Your air conditioner contains a clock used to start and stop the unit
automatically at a given time.
You must set the time when you:
Purchase the air conditioner
Replace the batteries
NN
NN
oo
oo
tt
tt
ee
ee Be sure to reset the time when you change clocks from
standard todaylight savings time and vice versa.
Setting the T
ime for the First Time
1 Insert the batteries.
Push the battery cover on the rear of the remote control with your
thumb and remove it.
Result
: The clock starts.
2 Using a small pointed tool (ball-point pen for example), Press the button.
Result
: The AM indication flashes.
3 To set the current time, press the or buttons under the cover on
the remote control.
To... Then...
Increase the time in one-minute intervals Press the ()button.
Increase the time in ten-minute intervals Hold down the ()button.
Decrease the time in one-minute intervals Press the ()button.
Decrease the time in ten-minute intervals Hold down the ()button.
Result
: AM or PM is displayed to indicate whether the setting
corresponds to a time before or after midday.
4 When you are satisfied with your setting, confirm the time. To do so:
using a small pointed tool (ball-point pen for example), press the button.
Result
: The AM or PM indication stops flashing.
The clock starts.
Resetting the T
ime
If you have already set the time but wish to change it, proceed as
follow.
1 Using a small pointed tool (ball-point pen for example), press the button
under the remote control flap.
Result
: The AM or PM indication flashes.
2 Set the time, following the instructions in Step 3 in the procedure above.
3 When you are satisfied with your setting, confirm the time. To do so,
press the button, using a small pointed tool (ball-point pen for
example).
Result
: The AM or PM indication stops flashing.
The clock starts.
E-
8