Samsung NH300WHXES Heat Pump User Manual


 
Operating basic function _17
ENGLISH
SPACE COOLING OPERATION
In this mode, cooling will be activated as required by the water temperature set point.
• The set point can be set manually
• or set weather dependant
1. Press Power(Space mode) button to turn on the heat
pump unit.
The heat pump will be turned on in the mode you select.
• Space water cooling devices: Radiator or Fan coil unit
(field supply)
• Heating and cooling mode can not be selected at
the same time.
• Space cooling operation is not possible if the
installation is a heating only installation.
The heat pump has a built-in protection mechanism
to prevent the unit from being damaged when it is
started immediately after being plugged in or stopped,
the heat pump will start up after 3 minutes.
2. Press the Mode(Space mode) button twice to select the space cooling mode.
The heat pump will run on cooling mode.
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 5ºC to 25ºC.
The temperature is adjusted by 0.5ºC.
CAUTION