Filter
Top Products
Operating basic function _19
ENGLISH
DOMESTIC WATER HEATING OPERATION
In this mode, domestic water heating will be activated as required by the water temperature set point.
• The set point can be set manually
1. Press Power(DHW mode) button to turn on DHW tank.
The priority between heating/cooling/water-law and
DHW modes are depending upon the user’s input of
Field Setting Value of Wired Remote Controller.
The default priority is on the DHW mode.
• This mode can not be used when the DHW tank is
not installed.
• The
Power(Space mode) button and the
Power(DHW mode) button can be selected at the
same time.
• In order to provide domestic hot water throughout the day, it is advised to keep the
domestic water heating operation on continuously.
• When the
icon is displayed, hot water is delivered to the DHW tank by the solar
panel. The operation between solar panel and heat pump can be determined by using
Wired Remote Controller’s Field Setting Mode.
2. Press Mode(DHW mode) button until required operating mode is displayed.
The heat pump will run on selected domestic water heating mode.
• Economic domestic water heating
• Standard domestic water heating ( may operate)
• Powerful domestic water heating ( operate immediately)
3. Press Up or Down button to set the desired temperature.
The temperature can be set between 30ºC to 70ºC.
The temperature is adjusted by 0.5ºC.