Filter
Top Products
E-
30
Cleaning Your Air Conditioner
To get the best possible use out of your air conditioner, you must clean
it regularly to remove the dust that accumulates on the air filter.
Before cleaning your air conditioner, ensure that you have
switched off the electric circuit breaker used for the unit.
Open the front grille by pushing the tabs on the grille.
1
Remove the front grille.
2-1 Remove the safety clips.
2-2 Open the front grille about 45° and pull it forward.
2
Pull out the air filter.
3
Remove all dust on air filter with a vacuum cleaner or a brush. In case of
serious dust accumulation, put the air filter in warm detergent water and
shake it vertically.
4
Dry the air filter.
5
When you have finished, insert the filter into the front grille.
6
Clean the unit with a vacuum cleaner or a brush once a month.
7
Reinstall the front grille and the safety clips.
8
IMPORTANT
You must give attention when disassembling the front
grille and must check the safety clips have been
installed. If you do not check them, the front grille will
drop suddenly and you will be hurt.
IMPORTANT
After cleaning the air conditioner, press the Filter Reset button.
NN
NN
oo
oo
tt
tt
ee
ee
When you have installed the Bio-Pure filter, do not allow any liq-
uids to contact the filter. It may lose its properties.
NN
NN
oo
oo
tt
tt
ee
ee
You can use all 4 points of the indoor unit for installing the front
grille and the safety clips depending on your requirement.
NN
NN
oo
oo
tt
tt
ee
ee
Wired Remote Controller Wireless Remote Controller
Safety Clip