Filter
Top Products
Maintain tools and filter _ 15
04 MAINTAIN TOOLS AND FILTER
1. Unplug cleaner from electrical outlet.
2. Remove 3 screws at back of the vacuum cleaner show with a screwdriver.
3. Clean up the smart inverter inside.
4. Refit hose inverter (Check the position carefully)
5. Refit smart inverter and 3 screws.(When refit the smart inverter while slide inverter
pushing down)
6. Slide fully connected hose with the inverter(Check the position carefully)
7. Pull the brush hose on the back of brush and slide fully connected brush hose with
inverter.
Smart Inverter
Silde inverter
Hose inverter