Filter
Top Products
EN-7
VACUUMING WITH THE POWER BRUSH
1. Attaching the Power Brush
The hose must be plugged into the canister and the power brush
must be plugged into the hose and extension wand (see page 3).
2. Vacuuming
• For best results, move the power brush slowly using short,overlap-
ping strokes.
• For heavily soiled areas, repeat strokes in several directions.
• Turn height adjustment knob to match the surface being cleaned.
(optional)
Used dust bag can be sealed by remov-
ing the film from the paper and sticking
the latter over the suction
opening.(ONLY PAPER BAG)
4) Press the dust cover down gently
until the clamp relocks.
3) After removing the used dust bag, insert
the cardboard bag collar of the new dust
bag into the suction inlet all the way.
MAINTENANCE OR REPLACEMENT OF THE FILTERS
1) INLET-FILTER.
• Open the dust cover.
• After detaching the filter, wash it lightly with water, dry it
in the shade, and then insert it in its original position.
• Close the dust cover.
2) OUTLET-FILTER.
• The outlet-filter which the air comes out from the vacu-
um-cleaner.
• Open the dust cover, and then pull the hook upward
located at the front of the grille filter.
• Remove and replace the exhausted outlet-filter.
• Close the grille filter, and then close the dust cover.
NOTE :
GRILLE-FILTER
OUTLET-
FILTER
INLET-
FILTER
DJ68-00079J 7/2/01 11:30 AM Page 9