Filter
Top Products
E-
9
Airing Your Room
If you want to provide air circulation without cooling, you can use
the
Fan mode.
If necessary, press the (On/Off) button.
Result: The air conditioner starts up in the Cool mode
.
The
unit beeps twice.
1
To set the fan speed:
Press
the , or button on the remote control as desired.
or
Press the button on the unit one or more times until the
desired
fan speed(F1, F2 or F3) is displayed.
3
To control the direction of the air flow, refer to page 11.
4
If the fan speed(F1, F2 or F3) is not displayed on the control panel:
Press
the button on the remote control
or
Press the button on the unit one or more times until the fan speed
(F1,
F2 or F3) is displayed.
Result
: The unit beeps each time you press the / button.
The
air conditioner starts up in Fan mode.
You can change modes at any time.
When
the air conditioner is in the Fan mode, the temperature
cannot
be set or displayed.
2
Remote Control
Control
Panel