Filter
Top Products
E-
8
Cooling Your Room
To adjust the temperature, press the or buttons on the remote
control
or unit one or more times until the desired temperature is displayed.
The
temperature can be set between 18 C and 30 C.
Result
: Each time you press the or buttons:
- The temperature is adjusted by 1 C and displayed on
the
control panel
- The unit beeps
The
air conditioner starts cooling, if the room temperature is
higher
than the selected temperature.
If
the room temperature reaches the set temperature, the air
conditioner
stops cooling, but the fan is still operating.
3
Pres
s
the (On/Off) button.
Resul
t: The air conditioner starts up in the Cool mode.
Th
e
unit beeps twice.
Th
e
air conditioner is fitted with a protection mechanism to prevent
th
e
unit from being damaged when it is started immediately after
bein
g
:
Plugge
d
in
Stopp
e
d
It
will begin to cool after three minutes.
If the temperature is not displayed on the control panel:
Press
the button on the remote control
or
Press the button on the unit one or more times until
is displayed.
Result
: The unit beeps each time you press the / button.
The
air conditioner starts up in the Cool mode.
You can change modes at any time.
You must select the Cool mode if you wish to lower the temperature
in
your room. You can also set the Fan speed.
1
2
To set the fan speed:
Press
the , or button on the remote control as desired.
or
Press the button on the unit one or more times until the
desired
Fan speed(F1, F2 or F3) is displayed.
4
To control the direction of the air flow, refer to page 11.
5
Remote Control
Contro
l
Panel