Filter
Top Products
Solving Common Problems
Before contacting the after-sales service, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
PROBLEM
EXPLAN
ATION / SOLUTION
The air conditioner does no
t
operate at all
The air conditioner does no
t
coo
l
The air fl
ow direction does not
change when you set the air
flow blade swing switch to the
on position
Odours are pe
rmeated in the
room during air conditioning
Che
ck that the circuit breaker used for the air conditioner
has not been triggered.
Che
ck that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Che
ck that the correct operating mode has been selected
(cooling or airing).
Che
ck that the correct operating mode has been selected.
The room tempe
rature may be too low.
Dust m
ay be blocking the air filter;
refer to page 9 cleaning instructions.
Che
ck that there is no obstacle blocking the air flow into or out of the unit.
Che
ck that the air conditioner has been switched on;
if necessary, turn the operating mode selection dial;
refer to page 7.
Air the room.
E-
9
HSILGNE