Filter
Top Products
installing _17
installing your air conditioner
SETTING UP THE AIR CONDITINER
The air conditioner must be installed horizontally or tilted slightly to the outside for proper water drainage.
Assembly for drainage
Once a location has been selected for installation, proper drainage should be established. If the
drain tube and/or drain hose are not provided, call your nearest contact center.
1. Attach the gasket
1
and the drain tube
2
to the base pan hole
3
in the rear side of the unit
with screws
2. Connect the Rubber Cap
5
to the drain tube hole.
On exceptionally hot and humid days the air conditioner may overflow condensed water.
In hot and high humidity zones, make sure the Rubber Cap have been removed .
1
2
4
REAR SIDE
5
3
4