Filter
Top Products
E-10
Solving Common Problems
Problem Explanation/Solution
The air conditioner does not
operate at all
Check that the circuit breaker used for the air conditioner has not
been triggered.
Check that the power cable is plugged into a wall socket and the
socket is switched on, if necessary.
Check that the correct operating mode has been selected
(cooling or airing).
The air conditioner does not cool
Check that the correct operating mode has been selected .
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 8
cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of
the unit.
The air flow direction does not
change when you set the air
flow blade swing switch to the
on position
Check that the air conditioner has been switched on;
if necessary, turn the operating mode selection dial;
refer to page 7.
Odours are permeated in the
room during air conditioning
Air the room.
Before contacting the after-sales service,perform the following simple checks.
They may save you the time and expense of an unnecessary service call.
DB98-27204A.indd 10 2007-1-23 9:18:43