Filter
Top Products
E-27
Ventilate the room.
Check that the timer has been programmed correctly;
refer to page 12~14,20~22.
Check that the correct operating mode has been selected(Cool).
The room temperature may be too low.
Dust may be blocking the air filter; refer to page 26 for cleaning instructions.
Check that there is no obstacle blocking the air flow into or out of the unit.
Check that you are pointing the remote control at the remote control sensor
on the unit.
Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
Check that there are no obstacles between you and the unit.
Replace the remote control batteries if necessary.
Check that the circuit breaker used for the air conditioner has not been
triggered.
Check that the power cable is plugged inot a wall socket and the socket is
switched on, if necessary.
Check that the temperature indicator on the unit is lit; if necessary,
press the (On/Off) button on the remote control or unit.
Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
Explanation / Solution
The air conditioner does
not operate at all
The air conditioner does not
operate with the remote
control
No beep is heard when you
press the (On/Off) button
on the remote control
The air conditioner does not
cool
The timer is not correctly
triggered
Odors are permeating the
room during air conditioning
Technical Specifications
Design and specifications are subject to change without notice.
Model Power Supply
AW0593L
AW0693L
AW0893L
AW1093L
AW1293L
AW1893L
115V~, 60Hz
230-208V~, 60Hz