Filter
Top Products
E-15
Type “A” screws
Type “A” screw
Window bracket (Type “C”)
Extend the window filler panels.
7-1
Secure the window brackets to the stool using the Type A screw at
each side.
7-2 Secure the top mounting channel to the bottom sash with the Type
A screw in the center.
7-3 Extend the window filler panels into the window sash tracks
on both sides. When the window is pulled down, the window should
rest on the unit just behind the window filler panel frames.
7-4 Slide the window filler panels outward until they touch the sides
of the window. Secure the panels by putting four Type A screws
through the mounting holes in the panels and driving them into the
window stool and sash.
7
NN
NN
oo
oo
tt
tt
ee
ee
After several minutes the unit will be blowing out cold air.
If the unit is not cold, please return it to the dealer.
Install the window gasket.
Cut the foam window gasket to the window width and stuff it between the
window and the glass to prevent air and insects from getting into the room.
8
Check for air leaks and seal.
9
Plug in the power, switch on the air conditioner, turn the SELECTOR to
COOL mode and check for unusual vibrations.
10