Filter
Top Products
Selecting the Long Function
You can use the Long cooling function when you wish to make the cool
air run to every corner in your room, especially when you are away from
the air conditioner.
1
If necessary, press the (On/Off) button.
Result
: ◆ The POWER indicator on the indoor unit lights up.
◆ The air conditioner starts up in the mode selected when the unit
was last used.
◆ The indoor unit beeps.
2
Press the button one or more times until is displayed on the
remote control.
Result
: ◆ The temperature and fan settings are adjusted automatically.
◆ The air conditioner cools the room as far as possible.
3
If you wish to stop the Long function, press the button one or more
times until , or disappears.
Result
: The air conditioner is reset automatically to the previous mode,
temperature and fan settings.
But, if you press the button in DRY or FAN mode, it will
change to AUTO mode automatically.
4
To control the direction of the air flow, refer to page
15.
You cannot adjust the outer air flow blades when the Long
function is selected.
NN
NN
oo
oo
tt
tt
ee
ee
E-13
ENGLISH