Filter
Top Products
In order to install drain hose through wall, adjust height (max. 150mm/5.91 inch) of the indoor unit using leg
holder.
B
A
Anchor bolt fixing dimensions
Nut
A 840(33 inch)
B 415(16.4 inch)
Unit:mm(inch)
Outdoor unit leg
Leg holder
Foot holder
❏
Fixing to the floor
◆ When using the leg holder of the indoor unit.
1. Lie down the unit on flat floor.
2. Insert the leg holders into screwed holes
and then fasten them clockwise.
3. Turn the unit right and adjust horizontal line of it.
❈ Mis-alignment of the unit can cause vibration and noise.
Leg holder of
the indoor unit
Fixing holder of
the indoor unit
❏
When using the anchor bolt
1. Fix the unit on a flat, rigid floor using the anchor bolt.
(Anchor bolt : M10 x 4 points - separately purchased)
❏
When using the leg holder of the outdoor unit
1. Insert the foot holder (4EA).
2. Remove the nut fastened to the leg holder,
and then insert the leg holder into the hole of
the outdoor unit leg.
3. Fix the unit securely with the nut.
❏
Fixing to the wall
◆ When using fixing holder of the indoor unit.
1. Fix the holder using long screw bolts on wall.
2. Fix the unit using two screw bolts or four anchor bolts.
(Size of the screw hole on the holder is
ø
4.5mm/0.18 inch
and size of the bolt is
ø
6mm/0.24 inch).
INSTALLATION METHOD
INSTALLATION METHOD
Indoor Unit
Outdoor Unit
E-
28