Filter
Top Products
Airing Your Room
If the atmosphere in your room is stale, you can air it using the
FAN feature.
If necessary, press (ON/OFF) button.
Result:
◆ The On/Off indicator on the wired remote controller comes on.
◆ The air conditioner runs in the mode selected when the unit
was last used.
1
Select the fan speed by pressing the Fan button one or more times until
the intended value is displayed:
3
To control the direction of the air flow, refer to below.
4
Low
Medium
High
To select the FAN mode, press the Mode button until is displayed at
the top of the wired remote controller.
Result:
◆ The air conditioner runs in FAN mode.
2
E-25
ENGLISH
Adjusting the Air Flow Direction
Depending on the position of the indoor unit, you can adjust the position of
the air flow blades, thus increasing the efficiency of the air conditioner.
Press the Swing button.
Result:
The blades are moving between up and down.
1
To stop the blades, press the Swing button again.
To set to the required position, press the Swing button again
when the blades are in the required position.
2
When the air conditioner is first turned on, the blades are
moved.
IMPORTANT