Filter
Top Products
Redistributing the Driver
30 RSA BSAFE Crypto-C Intel Hardware User’s Guide
Redistributing the Driver via .inf Files
Instead of running the InstallShield silent install, described above, you can have the
user install the driver on the target system by doing the following.
User Instructions for Installing the Intel Security Driver
To install the Intel Security Driver, do one of the following, depending on whether
you are installing on Microsoft Windows NT 4.0, Microsoft Windows 95, or Microsoft
Windows 98.
Microsoft Windows NT 4.0
1. Copy the following files from the Crypto-C CD to a floppy disk.
\REDISTRIB
\INF
\WinNT4
NTDriver.reg
ISECDRV.SYS
2. Log on to the target system as the administrator.
3. Insert the floppy disk you created in step 1.
4. Copy ISECDRV.SYS from the floppy disk to:
\WINNT\SYSTEM32\DRIVERS
5. Edit the NTDriver.REG file to verify that the Imagepath setting specifies the correct
path to the
WINNT directory.
6. Run the NTDriver.REG file.
7. Restart the computer.
8. To determine if the driver is loaded and working properly:
Click Start|Settings|Control Panel, then double-click the Devices icon.
9. In the list of Devices, locate the ISECDRV device. Verify that its Status is "Started"
then set its Startup to "Automatic" (via the Startup button).