Filter
Top Products
- RESET TIMER (PRESS AND HOLD WHEN TIMER IS STOPPED)
- SELECT ALARM NUMBER AND CHIME
- STOP CHRONOGRAPH
- SHOW FREE LAP NUMBER (CHRONOGRAPH STOPPED)
- SELECT SEGMENT
- REVERSE SETTING (SET)
S3: - ENTER MODE SELECTION DISPLAY
- ENTER TIME MODE (MODE SELECTION DISPLAY)
- SELECT SETTING (SET)
S4: - ENTER TIMER MODE (MODE SELECTION DISPLAY)
- EL BACK LIGHT
- SET (PRESS AND HOLD)
- RELOAD TIMER (TIMER STOPPED)
- STORE SEGMENT AND RESET CHRONOGRAPH (PRESS AND HOLD)
- CLEAR SEGMENT (PRESS AND HOLD)
- EXIT (SET)
S5: - ENTER CHRONOGRAPH RECALL MODE (MODE SELECTION DISPLAY)
- SHOW TIME FOR 3 SECONDS
- REVERSE SELECTION OF LAP NUMBER IN SEGMENT
(D) MODE CHANGE OPERATION
At any mode (except setting), press S3 will enter mode selection display and a “Beep” sound will be given. Then
press the corresponding button to enter the desired mode directly.
ANY MODE
S3
MODE SELECTION DISPLAY
S5
S1
S4
S4 S1
ALARM MODE
TIMER MODE
S3 S2
S3 S2
TIME MODE CHRONOGRAPH MODE
S5
CHRONOGRAPH RECALL MODE
(E) HOW TO SET NORMAL TIME AND DUAL TIME
S5
S4 S1
S1
S3 S2
- At mode selection display, press S3 to enter Normal Time mode (T1) or Dual Time mode (T2), mode prompt
“TIME” will be displayed for 2 seconds first.
- Press and hold S2 for 2 seconds to toggle Normal Time mode or Dual Time mode.
- Press S1 to toggle between the 2 display formats of time, one with enlarged hour and minute digits.
- Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start
flashing.
- Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.
- Press S3 to select the next digits, weekday, 12/24HR or M-D/D-M for setting. The sequence is shown as follow:
SECOND HOUR MINUTE
S3 S3
YEAR
S3
S3
MONTH
S3 S3 S3
S3 S3
M-D/D-M
12/24HR WEEKDAY DAY
2