Filter
Top Products
INSTALLER SETTINGS
The INSTALLER SETTINGS are set during the initial installation. They tell the thermostat how to function with your heating or
cooling equipment. The following is a brief overview and discussion of these settings.
SYSTEM SETUP
The 9901i has a furnace or heat pump system selection.
1st STAGE HEATING
The 9915i can have a gas/oil or electric first stage heating.
Choose the energy source for 1st stage heating.
21
INSTALL MENU
SELECT
1ST STAGE HEATING
GAS / OIL
ELECTRIC
MAIN MENU
SELECT
INSTALLER SETTINGS
INSTALLER SETTINGS
INSTALLER SETTINGS
MAIN MENU
MAIN MENU
SELECT
SELECT
SYSTEM SETUP GAS
RESIDUAL COOL 60
AUTO CHANGEOVER OFF
EER ON
DEADBAND 3°F
SECURITY OFF
CONTACT INFO 3˚F
SERVICE INT
SERVICE INT
REMINDER RUN
TEMP OFFSET 3.0°F
SHORT CYCLE OFF
INSTALL MENU
SELECT
SYSTEM SETUP
FURNACE
HEAT PUMP
110-1069B.qxd 3/4/05 3:51 PM Page 21