Filter
Top Products
3. Press Press
To change
Temperature Differential*
*THE T
EMPERATURE DIFFERENTIAL IS FACTORY PRESET AT 1°. THIS MEANS
THAT WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM
THE TEMPERATURE SETTING
, THE SYSTEM WILL TURN ON. IF THE SYSTEM TURNS
ON TOO OFTEN
, INCREASE THE TEMPERATURE DIFFERENTIAL.
4. Press Press
To change
Residual Cooling**
**T
HE RESIDUAL COOL FEATURE WILL KEEP THE SYSTEM FAN ON FOR AN ADDITIONAL 30, 60 OR 90
SECONDS AFTER THE COMPRESSOR CYCLES OFF
. RESIDUAL COOLING CAN ONLY BE PROGRAMMED WHEN
SETTING THE COOLING PROGRAM
.
Changing Fahrenheit (F) to Celsius (C)
Press and Hold SET Press
Release both simultaneously.
QuickSet™ Programming Mode*
1. Place COOL-OFF-HEAT
in HEAT or COOL position.
2. Press & Hold SET. Press the ✟ button.
Release simultaneously.
3. The MORN indicator should be blinking. Program the Time-of-Day and
the temperature as outlined in the Setting Daily Program section.
*QuickSet™ will program all 7 days of the week with the same program.
Individual days can then be changed or modified.
6
SET P
>
>
SET
P
>
>
SET
P
>
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT AUTO - ON
>
>
COOL-OFF-HEAT
SET P
>