Filter
Top Products
15
Tools
1. How to connect the hose assembly to the vacuum
cleaner: Pull out and open the suction control dial by
turning the lid located on the back of the vacuum cleaner.
Insert the soft, rubber end of the hose assembly into the
cleaning attachment opening. Push in while twisting the
hose end to ensure the hose is fastened securely (Fig. 34).
2. How to connect the tool: You can connect any of the
cleaning tools to the end of the extension wand(s) or
curved wand and twist for a secure fit. To remove the
cleaning tool from the extension wand(s) or curved wand,
simply twist and pull apart.
WARNING: There is no way to turn this vacuum’s brushroll off. Therefore, when using the cleaning
tools it is important to keep your Riccar vacuum from running in the same spot for a period of time, as
carpet or flooring damage could result. If you need to keep the vacuum in the same spot for a period
of time, such as at the base of the stairs when cleaning the stairs, place something, like a flattened
cardboard box, under the vacuum to prevent damage to the floor.
Fig. 33
Fig. 34
Fig. 32
Optional cleaning tools
All Riccar upright vacuum cleaners offer an attachment port that enables you to insert
optional cleaning tools (available through your Riccar Retailer). Should you have carpeted
stairs, for example, it is highly recommended to use one of the two kits pictured, since each
offers either a 12- or 15-foot hose for safe stair cleaning. These kits are effective overall
cleaning tools to address some of the hard to reach areas of your home or car. Talk to your
Riccar Retailer to see which tools might be beneficial for your home.
For models with on-board tools
Attachment Set (Fig. 33)
1. 15-foot hose
2. Curved wand
3. Deluxe floor brush
For models without on-board tools
Deluxe Attachment Set (Fig. 32)
1. 12-foot hose
2. Curved wand
3. Extension wand (2 pieces)
4. Dusting brush
5. Crevice tool
6. Upholstery tool
7. Upholstery brush insert
8. Deluxe floor brush