Filter
Top Products
6
oPeRAtIon
Reclining the Handle
• Press the handle release pedal located on the
back of the vacuum with your foot to recline the
handle (Fig. 1).
On/Off Switch
• The power switch located on the vacuum handle, is a
three-way switch (Fig. 2). The middle position is the
“Off” setting, the rear position is the “On” setting and
the forward position is for “Maximum Power” (Fig. 3).
• Use the “Maximum Power” setting for carpet cleaning.
Use the “On” setting for cleaning bare floors and throw
rugs. Always turn the vacuum cleaner to the “Off”
setting before unplugging it from the electrical outlet.
Edge Cleaning
The edge cleaning feature provides improved cleaning
near walls and stationary furniture. For maximum edge
cleaning, place the left side of the nozzle, from the user’s
perspective, against the wall or stationary furniture.
Automatic Carpet Height Adjustment
Your vacuum is designed with an automatic self-
adjusting nozzle. No manual adjustments are required.
The height of the nozzle automatically adjusts to the
flooring surface. This self-adjusting feature allows the
nozzle to float evenly over all flooring surfaces.
Bare Floor Cleaning
Your vacuum is equipped with a squeegee on the bottom
of the vacuum to improve its effectiveness in cleaning
bare floors (Fig. 4). When cleaning tile, hardwood, vinyl,
etc., use the “On” setting for best results.
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ±.02 IN RADII X.X ± .02
X.XX ±.01 IN X,XX ± .01
X.XXX ±.005 IN MACHINE SURFACE
X.XXXX ±.0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0° 30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
1 OF 1
A
B
C
D
1
2 3 4
5
6
7
8
A
B
C
D
1
2 3 4
5
6
7
8
BYECN NODATEREV
5.000SCALE
Fig. 2
Fig. 1
Fig. 3
MATERIAL
DRAWN
ISSUED
SCALE
FINISH
DATE
DATE
DO NOT SCALE
UNLESS OTHERWISE SPECIFIED
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
X.X ± .02 IN RADII X.X ± .02
X.XX ± .01 IN X,XX ± .01
X.XXX ±.005 IN MACHINE SURFACE
X.XXXX ±.0005 IN BREAK SHARP CORNERS TO .010 MAX
± 0°30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
1.000
TACONY CORPORATION
1760 Gilsinn Lane, Fenton, MO 63026
PART NUMBER
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
1 OF 1
A
B
C
D
1
2 3 4
5
6
7
8
A
B
C
D
1
2 3 4
5
6
7
8
BYECN NODATEREV
5.000SCALE
ON
OFF
MAX
POWER
Fig. 4
This vacuum is intended for household use only.
DESCRIPTION
DRAWING SIZE:D
PART NUMBER
SHEET 1 OF 1
± .02
± .01
°30" COMMON TO BE CONCETRIC TO .002
TACONY CORPORATION CLAIMS PROPRIETARY
RIGHTS IN THE MATERIAL DISCLOSED HERE IN.
THIS DRAWING IS ISSUED FOR ENGINEERING
INFORMATION ONLY. IT MAY NOT BE REPRO-
DUCED, NOR MAY THE INFORMATION HERE IN
BE USED FOR MANUFACTURING PURPOSES
WITHOUT WRITTEN PERMISSION FROM TACONY
CORPORATION.
DESCRIPTION OF CHANGE
REV
PART NUMBER
SHEET
1 OF 1
A
B
C
D
1
2 3 4
5
6
7
8
7
8