Filter
Top Products
WARNING: Plumber – Be Aware:
· The solar cold and hot pipes between the solar
storage tank and the solar collectors MUST BE
of
copper and fully insulated with Armaflex insulation or
similar (minimum thickness 10 mm).
· Plastic pipe MUST NOT be used, as it will not
withstand the temperature of the water generated by
the solar collectors under stagnation conditions. The
solar collectors can generate extremely high water
temperatures, up to 150°C, and high water pressure
of 1000 kPa. Plastic pipe cannot withstand these
temperatures and pressures, and MUST NOT
be
used. Failure of plastic pipe can lead to the release of
high temperature water and cause severe water
damage and flooding. Refer to Warning on page 29.
PATENTS
This water heater may be protected by one or more patents or registered designs in the
name of Rheem Australia Pty Ltd.