Filter
Top Products
16
on when you press a key. Once the Start/Stop key has been pressed to start
treatment, the LCD backlight stays on for two minutes. The keypad backlight is always
on while the
S8 ESCAPE is on.
HOW TO CHANGE THE SETTINGS ON YOUR S8 ESCAPE
You can change settings (such as Ramp Time, Altitude) on the S8 ESCAPE by using the
keypad and LCD. When the
S8 ESCAPE is in standby mode you can display a series of
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.
Use the menu screens to change the ramp time, altitude compensation, and language.
You can also view details about the usage and software version of your
S8 ESCAPE.
HOW TO ENTER THE MENU SCREENS
When the S8 ESCAPE standby screen is displayed you will see the word ‘Menu’ in the
left-hand corner. To select the
S8 ESCAPE menu, press the Left key.
HOW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
HOW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
S8 ESCAPE
S8 CLASSICRAMP 10min
Menu
S8 CLASSIC
PATIENT MENU
ALT: 0-2000ft
Change Exit
USED HRS: 960
Exit
USAGE: 120/180
Exit
SW: SX123456789
Exit
LANG: ENGLISH US
Change Exit