Filter
Top Products
21How to Use the VPAP Menus
English
How to Use the VPAP Menus
The VPAP unit provides a set of functions arranged in menus and submenus. Via
the LCD screen, the menus and submenus allow you to view and change the
settings for a particular function. You can access the menus regardless of
whether the VPAP is in standby mode or delivering therapy.
Your clinician has preset the menu to either a standard view or a detailed view.
Both of these menus are explained below.
When the VPAP is turned on, a Welcome screen is displayed. After the device
self-checks are complete, the VPAP (or Ramp) screen appears.
Ramp Screen
If your clinician has set a maximum ramp time, the Ramp screen is displayed
after the Welcome screen. On the Ramp screen, you can immediately set a ramp
time. Ramp time is the period during which the pressure increases from a low
pressure to the prescribed treatment pressure. See “Ramp time” on page 15.
Ramp time can be altered in five minute increments (from OFF to a maximum
ramp time set by your clinician) by using the Up/Down key.
How to Use the Standard Menu
The standard menu allows you to view details about the time used and the
current software version of your VPAP. The Used (time) screen displays the total
number of hours for which the device has been used. It also displays the number
of days the VPAP was used out of the total number of days available for use.
Figure 1 summarises the VPAP standard menu series.
Figure 1: VPAP Standard Menu Series
• To access the VPAP menus:
Press the Left key (menu) while the VPAP (or Ramp) screen is displayed.
• To scroll through items within the menu:
Press the Up/Down key
• To exit out of the menu:
Press the Right key (exit)
SW: SX3650201
exit
RAMP: 20min
menu
RESMED VPAP III
menu
00000/00000days
USED:
00000hrs
Options:
OFF, 5, 10, 15, 20, 25,
30, 35, 40, 45 min
View only
View only
VPAP screen Ramp screen