Filter
Top Products
8
Programming Your Universal Remote For Cable Box
1. Manually turn on the Cable Box.
2. Press and hold the CODE SEARCH button until
the INDICATOR LIGHT lights, then release the
CODE SEARCH button.
3. Press and release the CABLE button
(the INDICATOR LIGHT will blink then remain lit).
4. Find the three digit code for your Cable Box in the code
list starting on the following page and enter it
using the Number Buttons.
After your code is entered, the INDICATOR LIGHT will
turn off.
5. Aim the remote at your Cable Box and press the
POWER button. Your Cable Box should turn off.
Note: If your Cable Box does not respond, try all the codes for
your brand. If the codes do not work, or your brand is not listed,
try the Code Search method on page 11.
6. With your Cable Box on, press CHANNEL UP. If
the Cable Box responds, no further programming
is required.
7. Enter your code here for easy reference.
CABLE BOX CODE
OFF
BLINK/ON