Filter
Top Products
9
Adhesive Tape Mounting
1. Clean and dry the mounting surfaces
for both the alarm and the magnet.
2. Peel the backing off of one side of
each of the supplied adhesive strips,
then attach them to the back of the
alarm and the magnet.
3. Peel the backing off of the other side
of the alarm’s adhesive strip. Press
the alarm firmly against the window,
door, or frame where you want to
mount it. Hold the alarm in place for
about a minute to secure it.
4. With the magnet’s arrow pointing
toward one of the engraved lines on
either side of the alarm, repeat Step 3
to attach the magnet.
49-421a.fm Page 9 Thursday, August 19, 1999 7:48 AM