Filter
Top Products
8
3. Line up the keyhole slots on the back
of the alarm with the screws, then
slide the alarm down onto the screws
to secure it.
4. Remove the bat-
tery compartment
cover and the bat-
tery. Then thread
a screw into hole
C inside the com-
partment. Rein-
stall the battery
and replace the
cover.
5. Use the two remaining screws to
mount the magnet so its arrow points
toward one of the engraved lines on
either side of the alarm.
Illus.
49-421a.fm Page 8 Thursday, August 19, 1999 7:48 AM