Filter
Top Products
9
MOUNTING THE SYSTEM
You can mount the system on a wall or
simply place it on a desk, table, or shelf.
To mount the system on a wall, use the
supplied screws, or screws suitable to
the mounting surface, to secure the
mounting bracket at the selected loca-
tion.
After you connect the system to power,
install a battery, and connect it to the
telephone line, you will simply hang the
system on the bracket.
INSTALLING A BACKUP
BATTERY
If AC power is disconnected or fails,
your system operates for up to 24 hours
from a 9-volt alkaline battery (Radio
Shack Cat. No. 23-553, not supplied).
Warning:
To prevent a possible electric
shock, always disconnect the system
from the phone line before you install or
replace the battery.
Follow these steps to install the battery.
1. Lift off the battery compartment
cover.
2. Clip a 9-volt alkaline battery onto
the battery contacts, then place the
battery into the compartment.
3. Replace the cover.
When the battery becomes low, the
POWER indicator blinks. Replace the
battery immediately.
Mounting on a Wall
Mounting in the Corner
ARMED POWERSERVICE
49-351.fm Page 9 Wednesday, August 18, 1999 4:37 PM