Owner’s Manual Quantum Energy Technologies
Figure 1: Installation Diagram (Compact Systems)
Document number: QDC0030PD-11 Page 12 of 40
Orientation
if multiple
Compact units are
Condensation
Drain
Power Cord
100 mm Min
Wall
500 mm
Min
being installed.
i.e. fan to face out.
Water
Connections
15°
32°
200 mm Min
PTR Valve
NOTE
Front Access
If installing multiple Compact units, the orientation of the tank will need to be at 90° to the normal arrangement
so that the fan points out from the wall rather than along it. This is so that cold air being discharged from one
unit is not drawn in by the one next to it. The space between multiple units should be a minimum of 200mm.
Tank Orientation Diagram for Compact Units