Filter
Top Products
21
Quadra-Fire • QVI30S, QVI35S • 340-901 Rev. i • 6/09
Step 3: Install the left side refractory in the same manner
(see Figure 11.4).
Step 2: While holding the back wall in place, install the
right side refractory. Bend down the small tab located on
the top front edge of the fi rebox (see Figure 11.3).
Step 1: Place the back wall refractory against the back
wall of the unit. The cut-out will be over the pilot and air
intake hole. On some models the refractory will be behind
the pilot bracket (see Figure 11.2).
Note: Refractory patterns and colors vary and may be
different from the ones represented in the instructions.
E. Refractory Placement
MODELS: Supreme-XT, Grand-XT,
QVI30, QVI35, ADI60
Refractory Placement
CAUTION: Refractory is fragile! Carefully remove the
refractory from the packaging.
340-945B 6/02
Figure 11.2
Figure 11.4
Figure 11.3