Page 2
7034-106E
September 1, 2008
R
Mt. Vernon Pellet Stove (AE)
Hearth & Home Technologies welcomes you to our tradi-
tion of excellence! In choosing a Quadra-Fire appliance,
you have our assurance of commitment to quality, durabil-
ity, and performance.
This commitment begins with our research of the market,
including ‘Voice of the Customer’ contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world’s most
advanced technology to achieve the optimum operation of
our stoves, inserts and fireplaces. And yet we are old-fash-
ioned when it comes to craftsmanship. Each unit is meticu-
lously fabricated and surfaces are hand-finished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
LOCATION OF SAMPLE SERIAL NUMBER / SAFETY LABEL: Back of Stove
Test Lab & Report No.
Mfg Date
Model NameSerial No.
SAMPLE
CAUTION
:
HOT WHILE IN
OPERATION DO NOT TOUCH,
KEEP CHILDREN, CLOTHING
AND FURNITURE AWAY.
ATTENTION:
CHAUD LORS DE L'OPÉRATION. NE PAS
TOUCHER. GARDEZ LES ENFANTS ET LES VÊTEMENTS
LOIN DE L'ESPACE DÉSIGNÉ DE L'INSTALLATION. LE
CONTACT PEUT CAUSER DES BRÛLURES À LA PEAU. VOIR
ESPACES LIBRES MINIMUM DES MATÉRIAUX COMBUSTIBLES:
INSTALLATION DE L’ALCÔVE
Une hauteur minimum de l'alcôve:
43 in.(
1092mm)
Une hauteur minimum m
ur de côté
de l'alcôve:
6 in. (152mm)
Une épaisseur minimum m
ur de côté
de l'alcôve:
40 in. (1016mm)
La profondeur maximum de l'alcôve:
36 in. (914mm)
Note 1: Dans les installations résidentielles, lorsque les pièces
TPVNT-MV, (dessus de l'adapteur de ventilation 3 in. - 3 in.) et
812-3570 (le ressaut de l'adapteur 3 in. - 6 in.), un tuyau connecteur
de 6 in. pour mur simple de calibre 24 peut être utilisé.
Note 2: Pour l'installation dans les maisons préfabriquées, lorsque
les pièces TPVNT-MV, (dessus de l'adapteur de ventilation 3 in. - 3
in.) et 812-3570 (le ressaut de l'adapteur 3 in. - 6 in.), utilisez un
tuyau connecteur enregistré pour mur double. Un assemblage d'air
extérieur (pièce 811-0872), doit être utilisé pour l'installation dans
les maisons préfabriquées.
PROTECTION DU SOL
A
B
G
G
D
E
F
C
C
A 2 in (51mm)
B 6 in. (152mm)
C 2 in. (51mm)
D 3 in. (76mm)
E 6 in. (152mm)
F 8 in. (203mm)
G 3 in. (76mm)
I*
J
J
K
I* = 2 in. (51mm)
J = 2 in. (51mm)
K = 6 in. (152mm)
G
G
D
E
F
C
C
A
B
2007
2008
2009
JAN FEB MAR APR MAY JUN
JULY AUG SEPT OCT NOV DEC
Mt. Vernon Pelle
t
Stove AE
Report / Rapport
061-S-68-6
OMNI-Test Laboratories, Inc.
O-T L
Tested &
Listed by
Beaverton
Oregon USA
C
US
ALCOVE INSTALLATION:
Min. Alcove Height:
43 in. (
1092mm)
Min. Alcove Side Wall:
6 in. (152mm)
Min. Alcove Width:
40 in. (1016mm)
Max. Alcove Depth:
36 in. (914mm)
A 2 in (51mm)
B 6 in. (152mm)
C 2 in. (51mm)
D 3 In (76mm)
E 6 in (152mm)
F 8 in.(203mm)
G 3 in. (76mm)
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS
FLOOR PROTECTION
Use a non-combustible floor protector, extending
beneath heater and to the front/sides/rear as indicated.
Measure front distance (K) from the surface of the
glass door.
I* = 2 in. (51mm)
J = 2 in. (51mm)
K = 6 in. (152mm)
I*
J
J
K
Note 1:
In residential
installations, when using
Parts TPVNT-MV, (3 in. - 3
in. Top Vent Adapter) and
812-3570 (3 in. - 6 in. Offset
Adapter), 24 gauge 6 in.
single wall flue connector
may be used.
*
Non-combustible floor protection must extend beneath the
flue pipe when installed with horizontal venting or under the
Top Vent Adapter with vertical installation. RECOMMENDED
IN USA
SERIAL NO.
/ NUMÉRO D
U
007001
Listed Solid Fuel Room Heater/Pellet
Type Stove.
Also suitable for Mobile
Home Installation. This appliance has
been tested and listed for use in
Manufactured Homes in accordance with
OAR 814-23-9000 through 814-23-909.
Tested to: ASTM E1509-04, ULC S627-00,
ULC/ORD-C1482-M1990 Room Heating
Pellet Burning Type, (UM) 84-HUD FOR USE
ONLY WITH PELLETIZED WOOD. See Owner’s
Manual for other fuel options.
Input Rating: 60,000 Btu's/hr. Electrical
Rating:
115 VAC, 60 Hz, Start 5 Amps, Run
1.25 AMPS.
Route power cord away from unit. Do not
route cord under or in front of appliance.
DANGER:
Risk of electrical shock.
Disconnect power supply before servicing.
Replace glass only with 5mm ceramic
available from your dealer. To start, set
thermostat above room temperature, the
stove will light automatically. To shutdown,
set thermostat to below room temperature.
For further instruction refer to owner's
manual.
Keep viewing and ash removal
doors tightly closed during operation.
DO NOT REMOVE THIS LABEL
NE PAS ENLEVER L’
É
QUETTE
7034-107B
Note 2: In manufactured home
installation, when using Part
TPVNT-MV, (3 in. - 3 in. Top Vent
Adapter) and 812-3570 (3 in. - 6 in.
Offset Adapter), use listed double
wall flue connector. An Outside Air
Kit (Part 811-0872), must be used
with manufactured home installation.
1445 Highway North,
Colville, WA 99114
www.quadrafire.com
Manufactured by / Fabriqu
é
par:
Made in the USA
Fait-Aux
É
tats-Unix