Quadra-Fire CB1200M-MBK Stove User Manual


  Open as PDF
of 48
 
R
December 16, 2011
7014-179D
Page19
CB 1200 Pellet Stove
3 to 3 inch Top Vent Adapter
3 to 6 inch Top Vent Offset Adapter
1. Putalayerofhightemperaturesiliconeonthe3inch
(76mm)exhaustoutlet.
2. Slidethetopventadapterontotherearexhaustoutlet
andadjusttheassemblytoaverticalposition.
3. Drill4holeswith#26drillbit(provided)intothebackof
theapplianceusingtheoutershieldasapattern(make
suretheassemblyisvertical).Figure 19.1
4. Installthe4mountingscrews.
5. Installtheventpipeintothetopventadapter(besure
tosiliconealljoints).
6 Tocleanthetopventadapter,opentheclean-outcover.
See Figure 19.1
B. Top Vent Adapter Installation
Installing the Top Vent Adapter
3" - 6"
Offset
Adapter
3" - 3"
Top Vent
Adapter
Drill holes in back of
stove and secure with 4
screws, 2 on each side.
Clean Out
Cover
Figure 19.1
C. Rear Vent and Rear Vent to Top Vent
Adapter Installation
Clean-Out Cover
Clean-Out Cover
Figure 19.2 - Rear Vent Adapter
Figure 19.3 - Rear to Top Vent Adapter - 90
o
1. Putalayerofhightemperaturesiliconeonthe3inch
(76mm)exhaustoutlet.
2. Slidetheadapterontotherearexhaustoutletandadjust
theassemblytotheappropriateposition.
3. Installtheventpipeintotheadapter(besuretosilicone
alljoints)
 previous next