Quadra-Fire 31M-ACC-NT Stove User Manual


 
March 2, 2007
7033-277C
Page 33
3100 Wood Stove Series (ACC)
R
Replace the rebrick if they become crumbly and/or if there
is a 1/4 inch (6.35mm) gap between the bricks.
The rebox is lined with high quality rebrick, which has
exceptional insulating properties. There is no need to use a
grate; simply build a re on the rebox oor. Do not operate
appliance without rebrick.
1. After the coals have completely cooled, remove all old
brick and ash from unit and vacuum rebox.
2. Remove new brick set from box and lay out to diagram
shown.
3. Lay bottom bricks in unit.
4. Install rear bricks on the top of the bottom bricks. Slide
top of bricks under clip on back of rebox wall and push
bottom of brick back.
5. Install side bricks. Slide top of brick under clips on side
of rebox and push the bottom of the brick until it is ush
with the side of the unit.
C. Firebrick Replacement
Use Part 832-0550 when ordering individual brick. Provide brick
dimension or copy this page, mark the desired brick and take it
to your authorized dealer.
No. Brick Size Qty
1 9 x 4-1/2 x 1-1/4 12
2 6 x 4-1/2 4
3 9 x 4-1/2 with angle 1
4 9 x 3 with angle 1
1
1
1
1
1
1
1
1
1
2
2
2
2
3
4
1
1
1
6 in.
4-1/2 in.
2
3
5 in.
2 in.
2 in.
1-1/4 in.
9 in.
1-1/4 in.
4
8 in.
3 in.
1-1/4 in.
No. Brick Size Qty
1 9 x 4-1/2 x 1-1/4 10
2 6 x 4-1/2 4
3 9 x 4-1/2 with angle 1
4 4-1/2 x 4-1/2 x 1-1/4 2
5 9 x 3 with angle 1
6 in.
4-1/2 in.
2
3
5 in.
2 in.
2 in.
1-1/4 in.
9 in.
1-1/4 in.
4
8 in.
3 in.
1-1/4 in.
2
2
2
2
1
1
1
1
1
1
1
1
1
1
4
4
5
3
No brick, ARS
Grate Location
Figure 33.2 - 3100 Step Top Brick Assembly
Figure 33.1 - 3100 Millennium Brick Assembly
NOTE: The Ash Removal System is only
available for the Step Top Model only and
not for the Millennium Model.