Filter
Top Products
1. Remove door from stove and lay on a padded flat surface.
2. Remove glass tabs and screws with a Phillips screwdriver (turn screws counterclockwise).
3. Lift glass frame pieces and glass out of the door frame.
4. Lay new glass with fiberglass tape around it into the door frame, making sure the Quadra-Fire logo reads
correctly to the outside.
5. Place glass frame pieces over the fiberglass tape on the edges of the glass. Be sure glass is centered in the
opening (i.e., same space top and bottom, left and right sides).
6. Reinstall screws and glass tabs tight enough to hold glass and frame in place. DO NOT OVERTIGHTEN.
7. Check again for centering of glass in door frame, and give all screws a final tightening.
DOOR HANDLE ASSEMBLY
GLASS REPLACEMENT
Page 24
LATCH CAM
NOTE:
Spring handle not included in door
handle assembly. When replacing
door handle, either use old spring
handle or order new spring handle
separately.