Filter
Top Products
Microsoft VPN
95
15. Click the Tunnel Setting tab, then select The tunnel endpoint is specified by this IP address.
Enter the WAN (Internet) IP address of VRT-311 / VRT-311S, as shown below.
Figure69: Tunnel Setting
16. Click the Authentication Methods tab, then click the "Edit" to see the screen like the
example below.
Figure70: Authentication Method
17. Select Use this string to protect the key exchange (preshared key), then enter your pre-
shared key in the field provided.
18. Click "OK" to save your changes and return to the Authentication Methods tab of the Edit
Rule Properties screen.
19. Click "Close" to return to the DUT to Win2K properties screen. The "To DUT" filter
should now be listed, as shown below.