Filter
Top Products
15
English
3. After assembling, connect the stand to the
floor to prevent from falling over.
1. Attach the stabilization bolts that come with the plasma
display.
2. Stabilize the display by connecting to a wall or standing
beam with a strong cord.
(Repeat the same steps in the laterally direction to stabi-
lize the assembly to the left and right.)
Use cord and hooks that are available on the market (sold sepa-
rately).
1
2
7 Sample use of the stabilization bolts
(50” display model is shown in the figure.)
64 (2-17/32)
275 (10-13/16)
248 (9-3/4)
485 (19-3/32) [50” display]
411 (16-3/16) [43” display]
7 Stabilizing to the floor
¶ Use screws (sold separately) to attach and stabilize the
stand.
7 Installation coordinates for screws used to stabilize the stand to
the floor
* When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch).
Units: mm (inch)
7 Specifications
Dimensions .............................. 566 (W) x 508 (H) x 339 (D) mm
(22-9/32 (W) x 20 (H) x 13-11/32 (D) in.)
Weight...................................... 4.0 kg (8.82 lb)
..................................... 42.9 kg (94.58 lb) (When the 50” plasma display is attached)
35.5 kg (78.27 lb) (When the 43” plasma display is attached)
11.5 (29/64)