Filter
Top Products
29
DISASSEMBLY INSTRUCTIONS
11
MUH-GA20VB - MUH-GA25VB - MUH-GA35VB -
OUTDOOR UNIT
E1E1E1
OPERATING PROCEDURE PHOTOS
1. Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screw of the service panel.
(3) Remove the screws of the cabinet.
(4) Remove the screws of the front panel and motor support.
(5) Remove the service panel, and remove the screw from
the insides.
(6) Remove the top panel.
(7) Remove the cabinet.
(1) Slide the sleeve and check if there is a locking lever or not. (2) The terminal with this connector has the locking
mechanism.
1Slide the sleeve.
2Pull the terminal while
pushing the locking
lever.
1Hold the sleeve, and
pull out the terminal
slowly.
The terminal which has the locking mechanism can be detached as shown below.
There are two types ( Refer to (1) and (2)) of the terminal with locking mechanism.
The terminal without locking mechanism can be detached by pulling it out.
Check the shape of the terminal before detaching.
<"Terminal with locking mechanism" Detaching points>
Connector
Sleeve
Locking lever
Photo 1
Photo 3
Screws of the
top panel
Screw of the
Service panel
Screw of the cabinet
Screws of the
top panel
Screws of the
cabinet
Screws of the cabinet
Photo 2
Screw of the front panel and motor support
(W) This photo shows MUH-GA20VB.
OB387-2.qxp 05.2.21 10:03 AM Page 29