Filter
Top Products
1.5
CONTENTS
1 UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
2 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3
3 CARE AND MAINTENANCE . . . . . . . . . . . . .1.3
4 DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . .1.3
5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . .1.4
5.1 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4
5.2 Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.4
5.3 Mounting the Unit . . . . . . . . . . . . . . . . . . . . . . .1.5
5.4 Camera/Lens Installation . . . . . . . . . . . . . . . . . . .1.6
5.5 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . .1.7
1 UNPACKING
Unpack carefully. This is electro-mechanical equipment and
should be handled with care.
Check for the following items:
■ Model number of unit.
■ Hardware Kit.
(1) ¼-20 Button-Head Flange Screw
(1) Tamper-resistant Tool (basic models only)
(1) Alternate Camera Bracket
(1) Key (Locking models only)
If an item appears to have been damaged in shipment, replace it
properly in its carton and notify the shipper. If any items are
missing, notify your Philips Communication & Security
Systems Sales Representative or Customer Service.
The shipping carton is the safest container in which the unit
may be transported. Save it for possible future use.
2 SERVICE
If the unit ever needs repair service, the customer should contact
the nearest Philips Communication & Security Systems Service
Center for return authorization and shipping instructions.
3 CARE AND MAINTENANCE
There are no moving parts in this unit. Regularly scheduled
maintenance will help prolong the operation life of this unit.
Clean the viewing window as needed with a mild, non-abrasive
detergent in water and a soft cloth.
4 DESCRIPTION
The LTC 9405 series are wall or ceiling mounted security
housings designed for applications such as prisons, parking
garages and hospitals. These housings are ideal for any
application requiring secure CCTV monitoring.
LTC 9405 has an overall size of 279 mm x 165 mm x 140 mm
(11 in x 6.5 in x 5.5 in). The LTC 9405 series housings accept
camera-lens combinations up to 190 L x 68 W x 68 H mm (7.5
x 2.7 x 2.7 in).
For maximum protection and durability, the light weight cast
aluminum design of the LTC 9405 series housings provide the
strength equivalent 10 gage steel with the superior strength to
weight ratio of aluminum. The standard viewing window is
constructed of 9.5 mm (0.37 in.) clear polycarbonate treated
with a scratch-resistant coating. The removable cover provides
access to the camera and is secured with a single tamper-
resistant and captive screw. A special tool is provided for
turning the screw to open or close the cover. During servicing
or adjustment of the camera, the cover may be completely
removed or (if mounted on a ceiling) it may be left attached to
the top panel assembly using the "hinged slots" provided.
Attractively styled these housings are designed to be mounted
on the ceiling, on the wall horizontally or on the wall vertically.
Options include a key lock on the access panel and a clear
12.7 mm (0.5 in) viewing window.
5 INSTALLATION
This installation should be made by qualified service
personel and conform to the National Electrical Code
and applicable local codes.
Tools Required.
Allenwrench - 5/32-inch.
Wrench - 10 mm.
5.1 Disassembly
1. Remove the hardware kit from the shipping carton.
2. Models LTC 9405/00 and 9405/03 require the use of the
special tool to unscrew the tamper-resistant screw on the
front of the cover. See figure 1.
Models LTC 9405/01 and 9405/05 require the use of the
key to unscrew the lock on the front of the cover. See
figure 1.
Figure 1: Removing the cover