Philips Impact Vacuum Cleaner Vacuum Cleaner User Manual


 
Important
Only use Philips s-bag` double-layer paper dustbags (type
FC8021) or the cotton dustbag provided (some versions only).
Check if the dustbag has been placed correctly.
Never suck up water or any other liquid. Never suck up ashes until
they are cold.
When the vacuum cleaner is used to suck up fine dust, the pores
of the dustbag may become clogged, causing the passage of air
through the dustbag to become obstructed.As a result, the
'dustbag full' indicator will indicate that the dustbag needs to be
replaced, even though the dustbag is not full at all.
Never use the appliance without the Motor Protection Filter.This
could damage the motor and shorten the life of the appliance.
Connecting accessories
C
1 To connect the hose to the appliance, push it into the appliance
and turn it clockwise.
To disconnect the hose from the appliance, turn it anticlockwise and
pull it out of the appliance.
C
2 Connect the tubes to the handgrip by inserting the narrow
section into the wider section while turning it a little.The tube
with the clip is the lower tube.
You can connect the combi nozzle and crevice/brush accessory in the
same way.
To disconnect the tubes and accessories, pull while turning a little.
The combi nozzle can be used on either carpets (without brush)
or hard floors (with brush).
C
3 Telescopic tube
Adjust the tube to the length you find most comfortable during
vacuum cleaning.
4 Connect the combi nozzle to the tubes.
ENGLISH4