Filter
Top Products
Solutions
Empty the dust compartment
(see chapter 'Cleaning').
Charge the appliance (see
chapter 'Preparing for use').
Clean the filter and the filter
holder (see chapter
'Cleaning').
Remove the obstruction from
the nozzle.
Reinsert the filter holder (see
chapter 'Cleaning').
Place the filter holder in the
dust compartment (see
chapter 'Cleaning')rtment.
Fasten the filter in the filter
holder by turning it clockwise
and put the filter holder into
the dust compartment.
Empty the dust compartment
(see chapter 'Cleaning').
Causes
If this problem is not caused
by any of the factors
mentioned above, please
contact the Philips Customer
Care Centre in your country.
The dust compartment is full.
The batteries are not fully
charged.
The filter is dirty.
The nozzle is clogged.
The filter holder has not been
placed properly in the dust
compartment.
The filter holder has not been
placed in the dust
compartment at all.
The filter is not in the correct
position.
The dust compartment is full.
Problem
The appliance
does not
clean
floors/the
suction power
is low.
Dust escapes
from the
appliance.
ENGLISH 13