Philips AC4072 Air Cleaner User Manual


  Open as PDF
of 23
 
adjust the sensitivity of the air quality sensor. When it is set to a higher
sensitivity level, the appliance already starts cleaning the air at lower
pollution levels to make the air even cleaner.
There are 3 sensitivity levels:
- standard
- sensitive
- extra sensitive
The pollution sensor is set to standard sensitivity. You can adjust the
sensitivity of the air quality sensor in the following way:
1 Iftheapplianceisalreadypluggedin,unplugtheapplianceandwait
forafewminutes.
2 PresstheAIRQUALITYbuttonandsimultaneouslyputthemains
pluginthewallsocket.
, Theappliancebeepstwiceandoneofthefanspeedlightsashesto
showthecurrentsensitivityleveloftheairqualitysensor.
Sensitivity level:
Fanspeedlight Sensitivitylevel
1 extra sensitive
2 sensitive
3 standard
3 PresstheFANSPEEDbuttontoadjustthesensitivityleveloftheair
qualitysensor.
, Oneofthefanspeedlightsashestoshowthesetsensitivitylevelof
theairqualitysensor.
4 Pressandholdtheon/offbuttontoswitchofftheappliance.
Note: When you change the sensitivity level, the appliance automatically starts
operating at the set sensitivity level whenever you switch on the appliance.
Auto mode
When the appliance is switched on, the built-in air quality sensor
automatically measures the ambient air quality. When the auto mode is
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
1 Pressandholdtheon/offbuttonfor2secondstoswitchonthe
appliance.
ENGLISH 11
 previous next