Filter
Top Products
9:4
A
B
C
D
E
9
10
8
11
Embroidery mode - stitch-out
Zoom (8)
Use to zoom in or out of the embroidery fi eld. Use
zoom in (+) to get a close-up of an area within the
embroidery design. Use (-) to return to zoom out.
Zoom to hoop/zoom to all (9)
Using this icon, you can toggle between zoom to
hoop and zoom to all. Zoom to hoop will adjust
the embroidery fi eld to fi t the selected hoop. Zoom
to all will show all the design(s) in the embroidery
combination the largest view possible.
Pan (10)
In embroidery stitch-out, the pan function is
always active. Use the stylus to pan on screen.
Option bar
More options (11)
Background fabric (A)
If you have changed the background fabric color in
embroidery edit, the background fabric icon will be
active and selected. To turn the background fabric
off and have a white background, deselect the icon.
Monochrome (B)
Touch the icon to activate monochrome
embroidery. All designs are shown in a grey color
and the machine does not stop for color block
changes. To deactivate monochrome embroidery,
touch the icon again.
Color merge (C)
If you want the machine to ignore the stop between
identical thread colors, e.g. after having used color
block sort, touch the color merge icon.
Full screen (D)
To see your design as large as possible, use the full
screen function. The embroidery will fi ll the whole
screen. To close, touch the screen once.
Save current state (E)
If you want to stop embroidering and save your
current position, touch Start/Stop to stop the
embroidery. Then touch the save current state icon
to save the current position. You can now turn the
machine off.
When saving current state, all your adjustments are
stored and you can continue to embroidery later. A
current state is saved until you re
place it.
Note: If you have chosen AutoSave current state in the
Settings menu, this icon will be disabled, and current
state is stored periodically.