Filter
Top Products
Adjustment
18
1.04.13 Needle thread tension release
Requirement
With the presser foot raised, both of the tension discs must be at least 0.5 mm apart.
● Mittels Handhebel den Stoffdrückerfuß hochstellen.
● Druckplatte 1 hinter der Spannungs-Trägerplatte 2 entprechend der Requirement richten.
If the tension is correct, release pin 3 must not be under pressure.
Fig. 1 - 13
2
3
1
The clearance of 0.5 mm is a minimum and can increase to more than 1 mm
when using thick threads.