Filter
Top Products
8 - 8
Installation and commissioning
8.02.02 Basic position of the machine drive unit (only on machines with Quick motor)
● Switch on the machine.
● Press the TE/speed key twice to select the input mode.
2 x
● Select parameter "798" by pressing the corresponding +/- key, and select service level C,
see Chapter 12.08.01 Selecting the user level in the adjustment manual.
● By pressing the corresponding +/- key, set the value for the parameter at "1".
● By pressing the corresponding +/- key, select parameter "700".
TE
100 on
TE
798 11
C
TE
700 0
B
● Sew one stitch by operating the pedal.
● Turn the balance wheel in the sewing direction until the needle point is level with the top
edge of the needle plate.
● Conclude the sewing motor adjustment by pressing the TE/speed key.
● Select parameter "799" by pressing the corresponding +/- key (selecting the machine
class).
TE
799 1
C