Filter
Top Products
6 Customer Care Center 1-800-732-2677
www.petsafe.net 7
6. Trim the collar as follows: (D)
a. Mark the desired length of the collar with a pen.
Allow for growth if your dog is young or grows a
thick winter coat.
b. Remove the Bark Control Collar from your dog and
cut off excess.
c. Before placing the Bark Control Collar back onto
your dog, seal the edge of the cut collar by applying a
flame along the frayed edge.
D
CAUTION
The Bark Control Collar should not be worn for more than 12 hours
out of every 24-hour period. Leaving the collar on too long could lead
to Skin Irritation. Please refer to page 3 for additional information.
Ensure a Proper Spray Pattern
For the PetSafe
®
Big Dog Spray Bark Control to perform
properly, the nozzle must be positioned correctly and there
must be a clear path from the Spray Nozzle to your dog’s
snout. Follow these steps:
1. Make sure the PetSafe
®
logo on the front of the unit is
upright and the Spray Nozzle is angled out and pointing up
towards the dog’s snout.
2. For long-haired dogs, it may be necessary to trim the neck
hairs along the path of the spray. It is important that the
spray reaches the dog’s snout to be effective.
CAUTION
Do not shave the pet’s neck as this
may increase the risk of skin irritation.
3. For optimal performance the spray bark collar should be
refilled before each use.