Filter
Top Products
6 Customer Care Center 1-800-732-2677
www.petsafe.net 7
Key Definitions
Spray Nozzle: Where the spray
ejects when your dog’s bark
is detected.
Sound Activated Sensor: Detects
the sound of your dog’s bark.
Refill Port: Where the spray
is refilled.
Yellow LED: Low spray indicator.
Two Color LED: Shows good or
low battery.
On/Off Button: Turns the collar on
and off, and resets the spray counter.
Sensor Probe: Detects the
vibrations of your dog’s bark.
Spray Nozzle
Refill PortSound
Activated Sensor
On/Off Button
Two Color LED
Yellow LED
Sensor Probe
Note: The Sensor Probe is not adjustable.
Fit the Bark Control Collar
Important: The proper fit and placement of your Bark Control Collar is important for
effective operation.
To assure a proper fit, please follow these steps:
1. Make sure that the Bark Control Collar is turned off.
2. Start with your dog standing comfortably (A).
3. Place the Bark Control Collar on your dog’s neck close to the ears.
Center the Sensor Probe underneath your dog’s neck, touching the
skin. Make sure the PetSafe
®
logo in the front of the unit is upright
(B). Note: It is sometimes necessary to trim the hair around the Sensor
Probe to make sure that contact is consistent.
SÍ
NO
A
CAUTION
Do not shave the pet’s neck as this
may increase the risk of skin irritation.
4. Check the tightness of the Bark Control Collar by
inserting one finger between the Sensor Probe and
the dog’s neck (C). The fit should be snug but
not constricting.
5. Allow your dog to wear the collar for several minutes,
then recheck the fit. Check the fit again as your dog
becomes more comfortable with the Bark Control Collar.
B
C