Filter
Top Products
12
Store Presets
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary tune knob
to select the preset location (1-18) where you wish to store the preset. When the preset
position is displayed (for example PRE1) press “SEEK>>” to store it. The screen will
display “PR SAVED” and your preset has been stored into memory.
Recall Presets
Press the “SCAN” button. Turn the rotary tune knob to scroll through the stored preset
stations. When the desired preset is displayed, press the “<<SEEK” button to select it.
Exit menus
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Steering Wheel Controls
Press and hold“▲” to tune up or “▼” to tune down.
Selecting AUX Input
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
tune knob to scroll through the available sources. Once “AUX” is displayed, press the
“<<SEEK” button to select the displayed mode.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “AM/FM” button and then the “AUX” button. Immediately turn the rotary
tune knob to scroll through the available sources. Once “SAT” is displayed, press the
“<<SEEK” button to select the displayed mode.
8. Altima & Rouge
iPod Operation
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “IPOD” is
displayed, press the “TUNE ▼” button to select it.
Next Track
Press the “SEEK ▲” button to advance to the next track.
Previous Track
Press the “SEEK ▼” button to return to the previous track.