Filter
Top Products
OPERATING INSTRUCTIONS
MANUAL CONTROL OPERATION
To operate the fan manually, use the buttons on the Fan Control
Panel (first, make sure the Remote Control is detached from the
Fan Control Panel to access the buttons).
ON/SPEED/OFF button:
Press the ON/SPEED/OFF button to turn the fan ON, to change
the speed from Low (L), Medium (M), or High (H), or to turn it OFF.
TIMER button:
Press the Timer button until the desired time of 1,2, or 4 hours is
selected. The fan will operate for the desired length of time chosen and then will
shut off automatically. To turn the Timer OFF, press the button until all of the timer
lights are off.
REMOTE CONTROL OPERATION
The Remote Control can be conveniently stored over the two plastic pins on the Fan
Control Panel. If the Remote was originally attached to the Fan Control Panel when
the product was first purchased, remove it by lifting it so that it detaches from the
two plastic pins.
INSTALLING BATTERIES FOR THE REMOTE
1. Press down on the battery compartment cover and
slide it out.
2. Insert the batteries (not included), making sure
that the positive terminals are facing the proper
way. (Note: use size “AAA”manganese or
alkaline batteries. Do not use rechargeable
batteries).
3. Replace the cover.
ON/OFF button:
Press the ON/OFF button to turn the fan ON or OFF.
SPEED button:
Press the SPEED button to change the fan speed from LOW
(L), MEDIUM (M), or HIGH (H).
TIMER button:
(operates the same as the TIMER button function for Manual
Control Operation above).
Using the Remote Control
Point the remote control at the receptor located on the fan control panel and press
the desired button. The remote control will work at an angle of about 60 degrees
between right and left from the receptor. The batteries must be removed from the
remote control before they are scrapped and safely disposed of.
ADJUSTING THE FAN HEIGHT
Turn the Height Adjustment Ring on the fan column counter clockwise. Lift or lower
the fan column to the desired height and turn the Height Adjustment Ring clockwise
to secure tightly in place.
ADJUSTING THE WIND DIRECTION
Push the grills slightly up or down to the desired direction.
ADDITIONAL FEATURES
This fan has additional features:
• Thermal Fuse – turns the fan off if it overheats.
• Convenient Carry Handle – allows for easy transport from room to room.
TROUBLESHOOTING
If your fan fails to operate, please follow these instructions:
• Be sure the fan is plugged in and that the electrical outlet is working
properly.
• Check for any obstruction. If you find any obstruction, turn the fan “OFF”.
Unplug the fan and carefully remove the obstruction. Plug the fan in and
turn it on again by referring to the OPERATING INSTRUCTIONS.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR FAN, PLEASE SEE THE WARRANTY
INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN
YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR
PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING
TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE.
CLEANING AND STORAGE
It is recommended that the fan be cleaned at least one time during the operating
season in order to provide the optimum level of performance. ALWAYS TURN THE
POWER OFF AND UNPLUG THE FAN BEFORE CLEANING. Be sure to save the box for
off-season storage.
• Turn the fan “OFF” and unplug it.
• Clean the plastic parts with mild soap and a damp cloth.
• Do not use any cleaning agents or detergents.
• Never immerse the fan in water.
• To dismantle the fan, reverse the assembly order.
• Pack the fan in the original carton and store it in a cool and dry place.
SPECIFICATIONS
Model No.: FS40-G5
Voltage: 120V, 60Hz
Fan Control Panel
Plastic Pin