Filter
Top Products
Pelco Manual C324M-I (8/98) 17
7.0 SPECIFICATIONS
MECHANICAL
Pan: Movement in horizontal plane:
PT280-24P 0-355°
PT280-24P/PP 0-355°
PT280-24SL 360°
PT280-24SL/PP 360°
Pan Speed: 12°/sec ±1° (No load condition)
Tilt: ±90° movement in vertical plane
Tilt Speed: 3°/sec ±.5° (No load condition)
Maximum Load: 15 lb (6.8 kg) at 2 inches (5.08 cm) from tilt table surface to
center of gravity (upright or inverted)
Gearing: Chain and sprocket final drive
Bearings:
Pan Heavy duty ball bearings
Tilt Oilite bronze bushing
Braking: Friction
ELECTRICAL
Input Voltage: 24 VAC required for pan/tilt
Power
Requirements: Running
Pan .31 amp (7.5 vA)
Tilt .38 amp (9.2 vA)
Starting
Pan .47 amp (11.2 vA)
Tilt .56 amp (13.5 vA)
Maximum Current: 2 amps per conductor
(SL model only)
Connectors: Amp CPC type, mate supplied, installed onto a pigtail exiting
from the base of the unit (all functions: camera power, lens, pan/
tilt and video)
Video Connector: BNC
Camera Power: Spade lugs
Motors: Two-phase induction type, continuous duty, instantaneous
reversing
Limit Switches:
Pan 5 amp (external adjustment)
Tilt 5 amp (external adjustment)